|
Plastic-Sert
AutoWrap
LOW
COST PER "ENVELOPE."
Plastic
"envelopes" cost a lot less than regular paper envelopes do (as
little as 1/10th ).
You
can use almost any kind of printed, colored or clear plastic including USPS
approved.
Save
up to 1 oz per "envelope."
GREATER
FLEXIBILITY
The
AutoWrap can polybag material up to a maximum width of 11.5" (300 mm),
length
of
17.3" (440 mm) and 1.15" (30 mm) thick. The maximum material piece
depends
Upon
the overall girth of the material (girth = width + thickness times 2).
INCREASE
SALES
The
use of polybags allows you to show your sales message clearly visible to the
customer without having to open the bag/envelope.
This
results in a better opening and reading rate and thus more sales!
Even
when the customer does not open the polybag, the sales message and the
advertisers'
name has been registered for future use. In other words - the advertising
paid off!
BUILT
TO LAST
This
machine is heavy duty and built for daily production - a real workhorse.
It
weights 600 pounds (300 kg), is over 8-ft (2.5 m) long and has a heavy-duty
metal
construction.
Either run the AutoWrap in-line or as a stand-alone with feeders, collator,
etc.
EASY
TO SET-UP & OPERATE
It
takes just seconds to go from one size to another mailing piece.
LOW
COST MACHINE
The
AutoWrap costs less than you think. Ask your authorized dealer for a quote.
Justify
it quickly - the machine operates at approx. 3,600 pieces per hour.
OPTIONAL
EQUIPMENT
Feeders
- Collators - Conveyors (in and exit lines) - Stacker - Photocell controls.
TECHNICAL
SPECIFICATIONS
Maximum
Polybag Format (Depending upon girth, side guides & forming box) :
11.5"/400
mm wide, 17.3"/440 mm long and up to 1.15"/30 mm) thick.
Minimum
Polybag Format (Depending upon girth, side guides & forming box) :
4.8"/120
mm wide, 7,5"/190 mm long.
Type
of film:
1.5
to 3 mil (15 to 40 microns). Almost any type of film.
Machine
Dimensions/Weight:
98.4"x38"x43"
- 2500x960x1100mm (LxWxH) - 600 lbs/300 kg
Electrical:
220V
- 60hz/50Hz - single phase
|
